Specifications: Chipset - Type Tele Chips TCC8902 Clock frequency to 1.0 GHz Processor - ARM11 500-800Mhz Memory (RAM) 0.25 GB Storage Capacity 4 GB Storage Type Flash Screen size 7 inches Screen resolution 800 × 480 Touchscreen Resistive type of operating system Google Android Android Android version 2.3 (Gingerbread) Weight 365 g Battery capacity 3200 mAh
Download:
Download this package with all the tools and drivers as well, of course, the firmware included.
Installation:
To this firmware for flashing, we first need root access then we install the custom recovery environment. After flashing the ROM, we can through the alternative recovery, ClockworkMod.
Root: (rooten, root access, root access, rooting, rooted, su, superuser)
Requirements / steps:
1. 211 tablets,
2. Windows XP, Windows Vista or Windows 7, Vista 64-bit or 7 64-bit
3. Enable USB debugging on the tablet:
Settings (Settings)> Applications (aplications)> Development (development)> USB Debugging (USB debugging)
4. Drivers for the tablet, 32-bit or 64-bit depending on the system.
5. The drivers are located in the download and can be installed if the tablet has been lots with a USB cable and USB debugging enabled.
6. Make sure the battery is low just in case it takes a long time to rooten (min. 30%)
7. Install PdaNet for Android, to ask the driver to choose Other as manufacturer.
8. Extract the file from Root_701.rar
9. Open the file and root flashlite.bat
10. You see a command prompt, the tablet is retted and start again automatically.
If we now apps, we see: superuser permissions (superuser permissions). If you open an app that needs root access as root file explorer, you are asked if super-user permission to the app.
Choose to remember (remember) and click OK or Allow (allow) within 10 seconds timeout. Your app now has root access and the app SUPERUSER keep a list of apps which have been previously root access so that every time the question has to be answered. Optionally, the system now as R / W (Read and Write) are mounted so that we can modify system files. The rooten itself takes a few seconds.
Recovery installation:
With Windows
Use 32 or 64 bit driver supplied depending on the computer and Windows version.
fastboot.rar Unzip the file into C: / This creates a folder is C: / fastboot.
Open CMD (DOS screen, command prompt)
Enter the following commands for a 1 followed by ENTER
cd \
(Note the command with backslash \)
cd fastboot
(fastboot folder to go to c: / fastboot)
adb reboot bootloader
The tablet will now reboot into bootloader mode, so wait until it's ready. Then type:
fastboot flash recovery recovery.img
Starts flashing. If this process is ready, press the power button and hold 20 seconds to secure the device off. Voila, now allowing boot into recovery mode. Keep this left the volume control with the power button down. When 'Welcome' lights, release the volume button.
Google Ion recovery (similar)
With Mac OSX or Linux
Use flash recovery mac.zip from the download so grab it out.
Open Terminal or Console, navigate to the extracted folder and type:. / Adb reboot bootloader
Wait until the tablet restarts. A "Welcome" message will be displayed.
Now type:. / Fastboot flash recovery clockwork_recovery.img
If this process is ready, press the power button and hold 20 seconds to secure the device off. Voila, now allowing boot into recovery mode. Keep this the right volume control with the power button down. When 'Welcome' lights, release the volume button.
Installing firmware:
Now the recovery works, we can flash the ROM. Yarvik_211_112611_v5.2.zip
1. Put the file via USB to the SD card. For example: sd / rom /
2. Go to the recovery menu by turning off the tablet, then again turn to the left volume button. Wait until recovery is loaded.
3. ALWAYS MAKE A BACKUP, using the backup and restore options. Navigate through the Recovery of your volume controls for up / down, power button for OK, and back in return. Make a backup, he just here doing.
4. Do a full wipe, then wipe cache pastry station, then wipe data partitioning and advanced options Wipe Dalvik cache. THIS IS VERY IMPORTANT.
5. If you've done this, go to 'custom install zip', then 'choose custom zip "from sd card.
6. Find your downloaded ROM, and press OK (power button). Go to 'yes' with 'volume' and select it with power.
7. The installation begins.
8. When installation is complete. select 'back' and then 'reboot phone'.
9. Booting the first time takes a very long time, this is normal. Certain processes for installing Android will now be completed.
10. After switching completely booted (2 minutes later) the tablet again and again and explore faster, better, more rooted, alternative gingerbread Android firmware ROM.
